Product Reviews

Silkland DP80 DisplayPort Cable Review

A short, high bandwidth cable for gamers connecting DisplayPort 2.1 devices across a compact desk setup.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review is most relevant to gamers who need a very short DisplayPort connection and want bandwidth for high refresh rates or high resolutions.

Its 1.6-foot length suits equipment placed close together, while the full benefit depends on the graphics card and display supporting the required DisplayPort capabilities.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short, high bandwidth cable for gamers connecting DisplayPort 2.1 devices across a compact desk setup.

  • VESA certified DisplayPort 2.1 cable with a stated 80Gbps data rate and UHBR20 support.
  • Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC, it lists up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Backward compatible with DisplayPort 2.0 and DisplayPort 1.4; supports dynamic HDR10+, HDCP 2.3, 3D, and uncompressed audio pass-through.
  • Gaming-related features include VRR, FEC, ALLM, DSC 1.2a, and MST for multi-monitor setups.

Pros

  • High stated bandwidth and support for demanding resolution and refresh combinations.
  • Short length can keep a nearby monitor connection neat and reduce excess cable at the desk.

Consider before buying

  • At 1.6 feet, it may not reach comfortably if the PC and monitor are separated or cable routing goes around a desk or arm.
  • The most demanding listed modes depend on compatible source and display hardware, and some require DSC.
Read the full review summary

This cable pairs a VESA certified DisplayPort 2.1 design with a stated 80Gbps data rate, support for UHBR20, and compatibility with DP 2.0 and DP 1.4.

The listed display modes include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, with higher resolution and refresh combinations possible using DSC.

These are capability ceilings, so the signal path and selected settings must also be supported by the connected devices.

The compact 1.6-foot run is the defining practical choice: it can keep a nearby desktop and monitor connected without a long cable loop. Nylon exterior, triple shielding, tinned copper conductors, and latch-free connectors round out a gaming-oriented build.

Buyers should check the ports and available routing space before choosing such a short cable, especially if a monitor arm or case placement adds distance.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth capacity

The stated 80Gbps rate and UHBR20 support target demanding DisplayPort 2.1 setups.

9/10

High refresh support

Several high refresh modes are listed, with the highest combinations dependent on DSC and device support.

8/10

Compact setup fit

At 1.6 feet, it is purpose suited to closely positioned equipment but offers little routing slack.

8/10

Build design

Tinned copper, triple shielding, a nylon exterior, and gold plated connectors are useful construction details.

8/10

Compatibility flexibility

Backward compatibility with DP 2.0 and DP 1.4 broadens its use beyond DP 2.1 hardware.

8/10

Gaming features

VRR, ALLM, FEC, DSC, and MST support address features relevant to gaming and multi-monitor configurations.

Key Features and Specifications of Silkland DP80 Cable

  • VESA certified DisplayPort 2.1 cable with a stated 80Gbps data rate and UHBR20 support.
  • Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC, it lists up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Backward compatible with DisplayPort 2.0 and DisplayPort 1.4; supports dynamic HDR10+, HDCP 2.3, 3D, and uncompressed audio pass-through.
  • Gaming-related features include VRR, FEC, ALLM, DSC 1.2a, and MST for multi-monitor setups.
  • Male-to-male DisplayPort connectors have a latch-free design; the cable has 28AWG tinned copper conductors, triple shielding, gold plated connectors, and a nylon exterior.
  • The 1.6-foot cable is designed for indoor connections between DisplayPort-equipped graphics devices and monitors.

Pros and Cons of Silkland DP80 Cable

Pros

  • High stated bandwidth and support for demanding resolution and refresh combinations.
  • Short length can keep a nearby monitor connection neat and reduce excess cable at the desk.
  • Backward compatibility supports use with DP 2.0 and DP 1.4 equipment.
  • Gaming and multi-monitor features include VRR, ALLM, DSC, and MST.
  • Latch-free connectors and a braided nylon exterior offer practical design details for installation and handling.

Consider before buying

  • At 1.6 feet, it may not reach comfortably if the PC and monitor are separated or cable routing goes around a desk or arm.
  • The most demanding listed modes depend on compatible source and display hardware, and some require DSC.
  • It is a DisplayPort-to-DisplayPort cable, so it will not directly connect equipment that only has another connector type.

Who Should Buy Silkland DP80 Cable?

Good fit

Consider the Silkland DP80 if your PC and monitor sit close together and both have DisplayPort ports.

Its short reach can suit a compact desk or a direct connection between nearby devices, while the high bandwidth leaves room for demanding refresh rates and resolutions when the rest of the setup supports them.

It is particularly relevant for a gaming display where VRR, ALLM, and high refresh output matter.

Check the monitor and graphics card specifications for the DisplayPort version, supported resolution and refresh modes, and whether DSC is needed for the mode you intend to use.

The cable's stated build details may also appeal if it will be connected and repositioned during setup.

Measure the route from port to port first, including any slack needed for a monitor arm or cable management, because the 1.6-foot length is the main constraint.

Who should skip it

Skip this length if your computer is under a desk, the monitor is mounted at a distance, or the cable needs to follow a longer route.

Measure the actual path and choose a longer run if it exceeds the available reach.

Look elsewhere if either device lacks a DisplayPort port or if you need the cable to convert between connector types.

Also avoid paying for high bandwidth you cannot use if your source or display does not support the targeted signal modes.

How the Silkland DP80 Cable fits a high-refresh setup

Bandwidth and display modes

The 80Gbps specification and UHBR20 support position this cable for DisplayPort 2.1 systems with demanding display modes. The listed uncompressed modes cover 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, while higher combinations rely on DSC.

Treat these as supported possibilities rather than guaranteed output: the graphics card, monitor, and chosen settings determine what the complete connection can deliver.

A deliberately short run

A 1.6-foot cable works best when the PC and monitor are close and the route is direct.

Less slack can make a tidy setup easier, but it also leaves less room to pull a tower out, adjust a display, or route around a desk edge.

Measure from connector to connector along the intended path rather than estimating straight-line distance.

Construction and installation

The cable combines 28AWG tinned copper conductors, triple shielding, gold plated connectors, and a nylon exterior. Those design choices are intended for signal integrity and durability, although they do not establish a measured lifespan.

The connectors are latch-free, which simplifies removal; ensure the plugs are fully seated and the cable is not pulled taut.

Gaming and multi-display use

VRR, FEC, ALLM, DSC 1.2a, and MST are included among its supported technologies. Their usefulness depends on what the connected equipment implements, and multi-monitor arrangements require matching the system's supported output paths.

Confirm device specifications and port availability before assuming every feature will be active in a particular setup.

Alternatives to Silkland DP80 Cable

One useful alternative is included; compare cable length and required display modes before choosing.

Computer DisplayPort Cables alternative

Silkland 54Gbps 16K DisplayPort Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps 16K DisplayPort Cable, 10 ft

Choose the DP80 when the shorter run and higher stated bandwidth suit a close, demanding setup.

The 10-foot model is the more practical fit when the route needs considerably more reach or compatibility with older DisplayPort versions matters more than the DP80's higher bandwidth.

  • This 10-foot model lists a 54Gbps rate, up to 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz.
  • It also lists compatibility with a wider range of earlier DisplayPort versions, including 1.0 through 1.4, and uses a double nylon braid.
  • The DP80 offers a stated 80Gbps rate and a very short 1.6-foot length, making it a fit for nearby devices where high bandwidth is the priority.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 is worth considering for a compact gaming setup that needs a short DisplayPort connection with high stated bandwidth.

Its 80Gbps rating, VESA certification, gaming features, and broad listed display modes give it a clear purpose, provided both connected devices support the modes you want.

Measure the route before buying and verify the source and monitor capabilities, including DSC requirements for higher combinations.

If your equipment sits farther apart, the 1.6-foot length is likely the deciding drawback; otherwise, it is a focused option for a nearby DP-to-DP connection.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short, high bandwidth cable for gamers connecting DisplayPort 2.1 devices across a compact desk setup.

  • VESA certified DisplayPort 2.1 cable with a stated 80Gbps data rate and UHBR20 support.
  • Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC, it lists up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Backward compatible with DisplayPort 2.0 and DisplayPort 1.4; supports dynamic HDR10+, HDCP 2.3, 3D, and uncompressed audio pass-through.
  • Gaming-related features include VRR, FEC, ALLM, DSC 1.2a, and MST for multi-monitor setups.

Written by

jciquebec2016.com Editorial Team

Editorial team

Independent editorial coverage of leadership & global exchange.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short, high bandwidth cable for gamers connecting DisplayPort 2.1 devices across a compact desk setup.

  • VESA certified DisplayPort 2.1 cable with a stated 80Gbps data rate and UHBR20 support.
  • Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC, it lists up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
Check Video Reviews on Amazon